一、產品簡介Introduction

　　●超微粉碎機由主機、輔機、電控箱三個部分組成；

　　●物料進入機體后迅速被打散撒向粉碎腔四周，隨后進入由回轉體轉子和襯板組成的粉碎區。轉子高速旋轉產生大量空氣渦流，物料在空氣渦流和離心力的雙重作用下既發生碰撞又在轉子和定子間發生剪切，研磨，實現超細粉碎；

　　●粉碎后的物料在主氣流的帶動下進入分級區，合格細粉隨氣流通過分級轉子排出機外，由收集裝置捕集；不合格粗粉在離心力作用下被轉子葉片打回到筒壁，并返回到粉碎區再繼續粉碎。

　　●It is composed of three parts:main machine,auxiliary machine,ａnd electric control box.

　　●After the material enters the machine body,it is quickly dispersed and scattered around the crushing cavity,ａnd then enters the crushing area composed of the rotating body rotor and the liner.The highspeed rotation of the rotor produces a large amount of air vortex.Under the dual action of air vortex and centrifugal force,the material not only collides,but also shears and grinds between the rotor and the stator to achieve ultrafine crushing.

　　●The pulverized material enters the classification zone driven by the main airflow,ａnd the qualified fine powder is discharged out of the machine along with the grading rotor along with the airflow,ａnd is collected by the collecting device;the unqualified coarse powder is driven back to the barrel wall by the rotor blade under the centrifugal force and smashed again.

　　二、產品參數Product parameter